Earthquake-Resistant construction

An earthquake can happen anytime, anywhere and without us knowing beforehand. That is why it is very important that the building we are living in is reliable and resistant to earthquakes.

Here are some good advice for contractors according to “5 Tips to Building an Earthquake-Resistant Structure” by Eastern Kentucky University.

1.Stiffness and Strength

When designing earthquake-resistant buildings, safety professionals recommend adequate vertical and lateral stiffness and strength – specifically lateral. Structures tend to handle the vertical movement caused by quakes better than the lateral, or horizontal, movement. Without considering earthquakes, professionals still focus on a building’s vertical stiffness and strength as it has to support itself. However, earthquakes introduce new directional forces that may not be prepared for. Buildings will shift left and right during the event, and, if not built properly, will quickly destabilize.

2. Regularity

This characteristic refers to the movement of the building when pushed in lateral directions. Safety professionals and building designers want the building to move equally so as to dissipate the energy without placing too much force on one side or another. If a building is irregular, then weaknesses will become apparent when the building sways. The weakness will compromise and the structure will see concentrated damage – which compromises the structure as a whole.

3. Redundancy

Possibly one of the most important safety characteristics when designing for safety, redundancy ensures there are multiple strategies in place in case one fails. These can potentially add to the building cost, but redundancies prove their worth if/when a natural disaster such as an earthquake occurs. Safety professionals advise equally distributing mass and strength throughout the structure so strength isn’t solely reliant on one factor.

4. Foundations

A stable foundation is a major characteristic of building a large structure regardless of natural disaster risks. It is critical for a building’s long-term survival, and a stronger foundation is necessary to resist earthquakes powerful forces. Different areas have unique foundational characteristics that define how a structure’s base needs to be reinforced. Professionals have to closely observe how the ground reacts and moves before building. Buildings designed to withstand violent earthquakes have deep foundations and driven piles. To stabilize these drastic measures, the foundations are connected so they move as a unit.

5. Continuous Load Path

Tying into the stable foundation characteristic, structural and nonstructural components of a building need to be interconnected so inertial forces dissipate. Multiple points of strengths and redundancies share the force instead of the quake splitting the foundation apart. This is the continuous load path characteristic that safety professionals, architects, and engineers must remain wary of during design. If the structure is not comprehensively tied together, components will move independently and collapse will be imminent. The continuous load path is the earthquake’s journey through the building – laterally and vertically. It is vital the path is intact or else it won’t be able to dissipate an earthquake’s powerful shudders.

 

Earthquakes happen less frequently than other natural disasters, but building earthquake-resistant buildings protect against all natural disasters. Safety professionals keep people’s safety a priority when researching and developing protective strategies for structural integrity. Due to the amount of synergy needed to develop earthquake-resistant building provisions, safety professionals work closely with other fields. They have to appreciate multiple factors they may not be experts in and communicate with other professionals to find the most effective solutions. (Eastern Kentucky University)

 

While you plan to build earthquake-resistant projects, try using BUILK to help you control your cost for free.BUILK Cost control is free software designed especially for SMEs construction business. BUILK covers all needed activities, from the planning process, record and track all the financial activities until the automatic cost evaluation report. You can receive real-time project information anywhere and anytime. The program is suitable for the contractor business, SMEs construction project owner and also the real estate developer. Start using BUILK now,Click here.

 

Thank you content from Eastern Kentucky University:  https://safetymanagement.eku.edu/blog/

About the author